Surge Protection Device Datasheets

Download datasheets for AC power SPD, DC solar PV SPD, Type 1 SPD, Type 2 SPD, Type 1+2 SPD, Signal line SPD, RS485 SPD, CCTV SPD and SCB.

Find Datasheets by Product Type

01   AC power surge protection devices

02 DC solar PV surge protection devices

03 Signal, RS485, data and CCTV surge protection

04 Type 1, Type 2 and Type 1+2 SPD series

Browse SPD Datasheets

Select a product category and download the corresponding technical datasheet. If you are not sure which datasheet is suitable, send us your system parameters.

Power Supply

AC Power SPD

For low-voltage AC distribution systems, main panels and sub-panels.

Type 1 / Type 2 / Type 1+2

Common Uc: AC385V/420V/440V

IEC 61643-11 Reference

View AC Power SPD →

New Energy Photovoltaic

Solar PV SPD

Effectively resist surge voltages, reducing equipment failures and downtime losses.

Type 2

AC & DC Power Protection

AC Power Protection

View Solar PV SPD →

New Energy Wind Power

Wind Power SPD

If Uc is lower than the actual operating voltage, the SPD may age quickly or fail.

Type 1 / Type 2

Common Uc: AC760V/1500V

AC Power Protection

View Wind Power SPD →

New Energy Charging Stations

EV Charging Station SPD

Resistant to outdoor high and low temperatures and water resistance.

AC Power Protection

Common Uc: AC385V

Poles/Configuration: 1P+N / 3P+N

View EV Charging Station SPD →

Analog Signal Network

Signal & Data SPD

RS485, PoE and telecom lines can also be damaged by transient surges.

CSRS-485

CSMS-RJ45

CSMS-TEL12/24/48

View Signal & Data SPD →

SPD Backup Protector

Surge Circuit Breaker

Ensure that the surge protection remains effective and that the SPD does not catch fire.

Conjunction with SPD

Type 1 / Type 2 / Type 1+2

Common Ue: AC220V/380V

View Surge Circuit Breaker →

SPD Datasheet Quick Reference

Use this quick reference table to identify the right datasheet before downloading.

Datasheet Application Voltage Reference Standard Best For
AC Type 1 SPD Main Distribution Board, Power Entrance AC 760V / 1500V IEC 61643-11 High-Risk Entrance Protection
AC Type 2 SPD Sub-distribution Board, Equipment Cabinet AC 385V / 420V / 440V IEC 61643-11 General Low-Voltage AC Protection
DC Solar PV SPD PV Combiner Box, Inverter DC Side DC 1000V / 1500V IEC 61643-31 Solar Photovoltaic Systems
Signal Line SPD RS485, Data Line, Telecom, CCTV 8V / 15V / 18V / 30V IEC 61643-21 Communication and Monitoring Systems

How to Choose the Correct Datasheet

If you are not sure which datasheet to download, start from your system type and installation position.

1

Confirm System Type

AC Distribution, DC Solar PV, Signal Line, CCTV, Telecom or Industrial Automation.

2

Check Voltage

Confirm Uc, Un, Working Voltage, Signal voltage or Communication Interface.

3

Find Installation Point

Main panel, sub-panel, inverter side, combiner box, control cabinet or signal line.

4

Download or Request

Download the matching datasheet or send us your parameters for recommendation.

Not Sure Which SPD to Choose?

Send us your system parameters and installation position. We will help recommend suitable SPD product categories or models.

System Type: AC, DC PV, Signal line, CCTV or SCB
Operating Voltage: AC Voltage, DC Voltage or Signal Voltage
Installation Position: Main Panel, Sub-Panel, Inverter Side or Equipment Side
Grounding System and Wiring Method if Available
Quantity Requirement or Project Background

FAQ

What information is needed for automation SPD selection?

You need to provide power voltage, signal type, communication protocol, cable length, installation environment, grounding condition, and protected equipment type.

Where should SPD be installed in industrial control systems?

SPD should be installed at power input points, cabinet cable entry points, communication interfaces, sensor line entrances, and near sensitive control equipment.

What type of SPD is used for RS485 communication?

RS485 systems require signal SPD designed for low-voltage communication lines. The SPD should match the working voltage, number of wires, transmission speed, and communication structure.

Can surge protection protect PLC systems?

Yes. Properly selected SPD can help protect PLC power supplies, communication modules, I/O modules, and connected field devices from surge damage.

What parts of an automation system need SPD?

SPD may be needed for AC power supply lines, DC power circuits, PLC input/output lines, RS485 communication lines, sensor lines, Ethernet networks, and control cabinets.

Why do industrial automation systems need surge protection?

Industrial automation systems include PLCs, sensors, control cabinets, communication networks, and power supplies. These components are sensitive to transient overvoltage caused by switching operations, lightning-induced surges, and electrical interference.

Can CRESIN provide SPD for PoE security systems?

Yes. CRESIN can provide Ethernet and PoE surge protective devices for IP cameras, network switches, and security monitoring systems.

Where should CCTV SPD be installed?

SPD should be installed near outdoor cameras, at cable entry points, near network switches, and close to protected monitoring equipment when necessary. When choosing CCTV SPD, both power and signal lightning protection must be taken into consideration simultaneously.

Do analog CCTV systems need different SPD?

Yes. Analog CCTV systems may require video signal SPD, power SPD, or control line SPD depending on the wiring structure.

What type of SPD is used for IP cameras?

IP cameras usually require Ethernet SPD, especially when installed outdoors or connected through long network cables. If PoE is used, the SPD should support PoE transmission.


Shandong Cresin Electric Co., Ltd.    SEO   CEGLOBAL     Privacy Policy

Follow Us

Contact Us

Address: No. 978 Tianchen Road, High-tech Zone, Jinan, Shandong,China

CAN’T FIND THE PRODUCT?

The product range includes production technologies for smart capacitors, digital display meters, surge protectors, dedicated backup protection devices for surge protectors, self-resetting over/under-voltage protectors, control and protection switches, and automatic transfer switches for dual power supplies.

Search HistoryClear All Records
Up to 8 search history entries will be displayed.~
全部
  • 全部
  • 产品管理
  • 新闻资讯
  • 介绍内容
  • 企业网点
  • 常见问题
  • 企业视频

LEAVE US A MESSAGE